Brother 82-W20 Operation Manual Download Page 405

Page: 405 / 420

UPGRADING YOUR MACHINE’S SOFTWARE

403

Ap
pe
ndi
x

Upgrade Procedure Using
Computer

While pressing the “Automatic Threading”
button, turn the main power to ON.

→

The following screen will appear on the LCD.

Press .

Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine.

→

“Removable Disk” will appear in “Computer (My
Computer)”.

Copy the upgrade file to “Removable Disk”.

→

The following message will appear.

When the message disappears, press

→

The upgrade file is loaded.

Unplug the USB cable, and turn the
machine off and on again.

Note

• Do not connect any additional USB media

devices to your computer when using the
USB cable.

Note

• If an error occurs, a red text error message

will appear. When the installation is
performed successfully, following message
will appear.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands