Brother 82-W20, Operation Manual

Page: 307 / 420

MAKING EMBROIDERY ADJUSTMENTS
Ad
va
n
ced
Em
br
oi
d
er
y
305
7
b
Press to turn off the thread
trimming function.
→
The key will display as .
* The machine will not trim the thread before moving
to the next stitching.
■
Selecting the Length of Jump Stitch
Not to Trim
When the thread trimming function is
turned on, you can select the length of the jump
stitch not to trim the thread. This function can be
turned on or off during embroidering.
Select a setting from 5 mm to 50 mm in 5 mm
increments.
* Your customized setting remains after turning the
machine off and on.
Press or to select the length of jump stitch.
For example: Press to select 25 mm (1 inch)
and the machine will not trim a jump stitch of 25
mm or less before moving to the next stitching.
Adjusting the Embroidery Speed
a
Press and .
b
In the “Max Embroidery Speed”, use
to change the maximum embroidery speed.
* You can choose from 8 different speed levels.
c
Press .
Changing the Thread Color
Display
You can display the name of the thread colors or
embroidery thread number.
a
Press and then, press .
Note
• If design has many trims it is recommended
to select a higher jump stitch trim setting in
order to reduce the amount of excess tails
on backside of fabric.
• The higher number of the jump stitch length
selected, the fewer number of times the
machine will trim. In this case, more jump
stitches remain on the surface of the fabric.
Memo
• SPM is the number of stitches sewn in one
minute.
• Decrease the embroidery speed when
embroidering on thin, thick, or heavy
fabrics.
• The embroidery speed can be changed
while embroidery is being sewn.
• The setting specified before the main power
is set to OFF remains selected the next time
that the machine is turned on.
• Decrease the embroidery speed to 600 spm
when using a speciality thread like a
metallic thread.
Memo
• Colors on the screen may vary slightly from
actual spool colors.