manualshive.com logo in svg

Axis AXIS 570, User Manual

The user manual for the high-performance Axis AXIS 570 is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and information on operating and optimizing the features of this exceptional product. Get your copy now for an enhanced user experience!

Share
Download
background image

 

AXIS 5470e/570/670e User’s Manual

 

3

 

Preface

Thank you for purchasing the AXIS 5470e/570/670e Network Print Server. This product has 
been developed to connect your printers anywhere in your network, allowing all network users 
access to the shared printer resources.

About this manual

This manual provides introductory information as well as detailed instructions on how to set up 
and manage the AXIS 5470e/570/670e in various network environments. It is intended for 
everyone involved in installing and managing the AXIS 5470e/570/670e. To fully benefit from 
the manual, you should be familiar with basic networking principles.

This manual is applicable for the AXIS 5470e/570/670e, with software release 6.20 or later.

About Axis

Axis Communications is dedicated to providing innovative solutions for network-connected 
computer peripherals. Since the start in 1984, it has been one of the fastest growing companies in 
the market and is now a leader in its field.

ThinServer™ Technology - 

enables Axis’ products to act as intelligent file server independent 

ThinServer devices. A ThinServer device is a network server which includes “thin” embedded 
server software capable of simultaneous multiprotocol communication, scalable RISC hardware 
and a built-in Web server which allows easy access and management via any standard Web 
browser. The ThinServer technology makes it possible to connect any electronic device to the 
network, thus providing “Access to everything”.

Today, Axis Communications is offering six major ThinServer product lines consisting of:

Network Print Servers - 

offer a powerful and cost-efficient method for sharing printer resources 

in your network. They connect to any standard printer, featuring high performance, simple 
management and easy upgrading across the network. The print servers are available in Ethernet, 
Fast Ethernet and Token Ring versions.

IBM Mainframe and S/3x - AS/400 Print Servers and Protocol Converters - 

include a wide 

range of LAN, coax and twinax attached print servers for the IBM host environment. By 
emulating IBM devices, these servers provide conversion of the IPDS, SCS and 3270DS data 
streams to the major ASCII printer languages. 

Summary of Contents for AXIS 570





























































































































































































































































































































Reviews:

No comments

Related manuals for AXIS 570

Canon PIXMA MX922 Setting Up preview
PIXMA MX922
Brand: Canon Pages: 29
Canon BJC-S9000 Quick Start Manual preview
BJC-S9000
Brand: Canon Pages: 65
Canon BJC-50 Datasheet preview
BJC-50
Brand: Canon Pages: 2
Canon Sure shot 80 tele Remote Ui Manual preview
Sure shot 80 tele
Brand: Canon Pages: 39
Canon BJC6500 - BJC 6500 Color Inkjet Printer Paper Manual preview
BJC6500 - BJC 6500 Color Inkjet Printer
Brand: Canon Pages: 6
Canon G600 Series Getting Started preview
G600 Series
Brand: Canon Pages: 20
Canon imagePROGRAF iPF6450 Manual preview
imagePROGRAF iPF6450
Brand: Canon Pages: 35
Canon PIXMA MX340 Series Connection Manual preview
PIXMA MX340 Series
Brand: Canon Pages: 11
Canon imagePROGRAF iPF6300S Setup Manual preview
imagePROGRAF iPF6300S
Brand: Canon Pages: 12
Canon MP980 series Connection Manual preview
MP980 series
Brand: Canon Pages: 19
Canon iP4700 - PIXMA Color Inkjet Printer Getting Started preview
iP4700 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 28
Canon i 320 Setup Instructions preview
i 320
Brand: Canon Pages: 2
Canon CX-G6400 Manual preview
CX-G6400
Brand: Canon Pages: 35
Canon GX5000 Series Getting Started preview
GX5000 Series
Brand: Canon Pages: 52
Canon Laser Class 810 Service Manual preview
Laser Class 810
Brand: Canon Pages: 322
Xante Accel-a-Writer 8300 Maintenance And Specifications preview
Accel-a-Writer 8300
Brand: Xante Pages: 12
Z Microsystems ZX1 User Manual preview
ZX1
Brand: Z Microsystems Pages: 17
Oki ES2024 Software Installation Manual preview
ES2024
Brand: Oki Pages: 20

Brands by name

Popular brands

Load more brands