Axis AXIS 570, User Manual

Page: 279 / 316

AXIS 5470e/570/670e User’s Manual Appendix G: DBCS Support
279
Amending Device Features
After automatic setup, it may be necessary to change the Device
features and Last Code Point of the printer device. Failure to do so
may cause corruption within your print data.
Follow the instructions below, to set the appropriate Device features
and Last Code Point for your chosen printer device:
1. Make sure that the writer is stopped by typing
ENDWTR
xxxxPRT01
on the AS/400 command line, where
xxxxPRT01
is the printer device name. Press ENTER.
2. Type
VRYCFG CFGOBJ(xxxxPRT01) CFGTYPE(*DEV)
STATUS(*OFF)
to vary off the printer device, where
xxxxPRT01
is the printer device name. Press ENTER.
3. Type
CHGDEVPRT xxxxPRT01
to change the printer device
name, where
xxxxPRT01
is the printer device name. Press F4.
4. Under DBCS Feature (IGCFEAT) amend the Device Features
and Last Code Point to the appropriate value corresponding to
the country language.
Device features and Last Code Point for Country options
5. Type
VRYCFG CFGOBJ(xxxxPRT01) CFGTYPE(*DEV)
STATUS(*ON)
on the AS/400 command line to vary on the
printer device, where
xxxxPRT01
is the printer device name.
Press ENTER.
6. Type
STRPRTWTR xxxxPRT01
to start the Writer, where
xxxxPRT01
is the printer device name. Press ENTER.
7. Direct a printout to this printer device to confirm that the above
changes have been implemented correctly.
Country Device features Last Code Point
Korea 2424K1 D3FE
Japan 2424J1 68FE
China 2424S1 6FFE