manualshive.com logo in svg

Axis AXIS 570, User Manual

The user manual for the high-performance Axis AXIS 570 is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and information on operating and optimizing the features of this exceptional product. Get your copy now for an enhanced user experience!

Share
Download
background image

Section 7: Setting Up - Windows

 

AXIS 5470e/570/670e User’s Manual

 

136

 

Installing

NetBIOS/NetBEUI

printers in Windows

NT 4.0/2000

Follow the procedure below to install Axis Printer Ports from a 
Windows NT 4.0 or Windows 2000 workstation:

1. To start the Add Printer Wizard, select 

Settings - Printers

 from 

the 

Start

 menu and double-click the 

Add Printer

 icon.

2. Windows 2000 only: Start the installation by clicking 

Next>

.

3. The Wizard asks you to select My Computer or Network printer 

server. Select 

My Computer

, as the AXIS 5470e/570/670e 

emulates a local printer port.

4. Click 

Add Port...

 in the Available ports dialog, select 

AXIS Port

 

and click 

New Port...

5. Select 

NetBIOS/NetBEUI

 as your choice of network protocol 

and click 

OK

.

6. Select the AXIS Port you want to add. The port appears as 

<name>.LP1, where <name> is AX followed by the last six digits 
of the AXIS 5470e/570/670e serial number, e.g. AX100086 
(default serial no.). Click 

OK

.

7. Close the Printer Ports window.

8. Click the 

Configure Port...

 button. Choose whether error 

condition pop-up messages are to be displayed by checking the 
box in the Configure Axis Ports dialog. Define the frequency at 
which the error messages should be displayed after retry. Click 

OK

. Continue the installation by clicking 

Next>

.

9. Choose the appropriate printer driver for your printer. Click 

Next>

 and proceed directly to step 11. It is only necessary to 

perform steps 9-10 if your printer does not appear in the list.

Note:

10. Click the 

Have Disk...

 button. Insert the printer driver 

diskette/CD that was provided with your printer, select the 
appropriate diskette/CD drive and click 

OK

.

Even if the desired printer is available in the Manufacturers and Printer Models list, 
you are advised to use the printer driver provided with your printer. This assures 
you of the latest driver software.

Summary of Contents for AXIS 570





























































































































































































































































































































Reviews:

No comments

Related manuals for AXIS 570

GCC Technologies 12 Ram Installation Manual preview
12
Brand: GCC Technologies Pages: 14
IBM HS12 - BladeCenter - 8028 Service Manual preview
HS12 - BladeCenter - 8028
Brand: IBM Pages: 204
Supero SUPERSERVER 6027R-TRF User Manual preview
SUPERSERVER 6027R-TRF
Brand: Supero Pages: 102
Wang 2231W-1 Maintenance Manual preview
2231W-1
Brand: Wang Pages: 181
Oki OJ2500 User Manual preview
OJ2500
Brand: Oki Pages: 80
A&D AD-8116 Instruction Manual preview
AD-8116
Brand: A&D Pages: 8
idp SMART-30S User Manual preview
SMART-30S
Brand: idp Pages: 88
AURES Posligne ODP-1000 Quick Start Manual preview
Posligne ODP-1000
Brand: AURES Pages: 4
IBM Eserver 345 Series Option Installation Manual preview
Eserver 345 Series
Brand: IBM Pages: 70
Oki IP-7900-21 Advanced Operation Manual preview
IP-7900-21
Brand: Oki Pages: 109
HPE ProLiant m710x User And Maintenance Manual preview
ProLiant m710x
Brand: HPE Pages: 58
Vidyo VidyoGateway Administrator'S Manual preview
VidyoGateway
Brand: Vidyo Pages: 186
Telvue HyperCaster User Manual preview
HyperCaster
Brand: Telvue Pages: 153
Fujitsu PRIMERGY CX120 S1 Service Supplement Manual preview
PRIMERGY CX120 S1
Brand: Fujitsu Pages: 82
Fujitsu PRIMERGY BX922 S2 Operating Manual preview
PRIMERGY BX922 S2
Brand: Fujitsu Pages: 106
Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual preview
PRIMERGY BX924 S3
Brand: Fujitsu Pages: 290
Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual preview
PRIMERGY BX924 S4
Brand: Fujitsu Pages: 286
Fujitsu PRIMERGY BX924 S3 Operating Manual preview
PRIMERGY BX924 S3
Brand: Fujitsu Pages: 64

Brands by name

Popular brands

Load more brands