manualshive.com logo in svg

Axis AXIS 570, User Manual

Share
Download
Axis AXIS 570 User Manual Download Page 112

Section 6: Setting Up - NetWare

 

AXIS 5470e/570/670e User’s Manual

 

112

 

Public Access

To create a public access printer using the NDPS Manager object in 
your NetWare administrator, do the following:

1. Double-click on the NDPS Manager object you will be using to 

control the Printer Agents. 

2. At the Identification page for the NDPS Manager, click the 

printer 

Agent List

 button. The 

Printer Agent List

 dialog will 

appear.

3. Click 

New

. The 

Create Printer Agent

 dialog will appear.

4. Type a name of your choice in the 

NDPS Printer Agent

 field. 

5. Choose the Axis Gateway configuration in the 

Gateway Type

 

window. Select TCP/IP or IPX as transport protocol (See Notes 
below).

6. Click 

OK.

7. Once you have completed the required tasks, you are ready to 

print in your NDPS environment.

Notes:

Controlled Access

1. Make sure that the NDPS Gateway is 

not

 configured to 

automatically create a public access printer, before you connect 
the AXIS 5470e/570/670e to the network.

2. Connect the AXIS 5470e/570/670e to the NetWare network.

3. Use the NetWare Administrator to create an NDPS printer as an 

object in the NDS Tree. 

4. Create a new Printer Agent (PA) or convert a Public Access 

Printer to a Controlled one.

•

The Public Access print servers are immediately available for everyone on the 
network.

•

The Axis Gateway will appear in NetWare 5.1 and later releases. To use the 
Axis Gateway with earlier versions of NetWare, you can download the Axis 
Gateway Configuration utility from www.axis.com.

•

To print using TCP/IP, Axis print server firmware 6.1 or later is required. In 
order to print using IPX/SPX, Axis print server firmware 5.51 or later is 
needed.

Summary of Contents for AXIS 570





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands