manualshive.com logo in svg

Axis AXIS 570, User Manual

Share
Download
Axis AXIS 570 User Manual Download Page 160

Section 9: Setting Up - Macintosh

 

AXIS 5400 User’s Manual

 

160

 

Bi-directional support

The AXIS 5470e/570 allows the printer driver to communicate 
directly with the printer and consequently facilitates complete 
functional control over print jobs, e.g. automatic downloading of 
fonts not resident in the printer.

This functionality has backward compatibility with older printers and 
Macintosh computers, which means that the AXIS 5470e/570 can 
generate appropriate responses to Macintosh printer queries, when the 
connected printer does not support bi-directional communication.

Verifying the Setup

You simply need to print a document from the Macintosh computer 
to verify communication to the chosen printer. The basic installation 
can be considered complete if the print test is satisfactory. The AXIS 
5470e/570 is now ready to use as a print server.

Note:

ASCII, TBCP and BCP

The Binary Communication Protocol (BCP) and the Tagged Binary 
Communication Protocol (TBCP) are communication protocols used 
by the serial and parallel ports of a printer. They allow 8-bit binary 
data in files concurrent with the use of some control characters, for 
communication and print job control. TBCP is required for printing 
with a binary data stream on some printers, e.g HP printers. 

Note:

For information on advanced AppleTalk functions such as non-PostScript printer 
support, please refer to the Axis NPS Print Server Technical Reference on the 
AXIS Online CD.

Some printers, e.g. Epson InkJet printers, can not be used when TBCP is enabled.

Summary of Contents for AXIS 570





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands