manualshive.com logo in svg

Axis AXIS 570, User Manual

Share
Download
Axis AXIS 570 User Manual Download Page 215

 

AXIS 5470e/570/670e

 

User’s Manual

Section 13: Using Logical Printers

 

215

 

Section 13 Using Logical Printers

Using Logical Printers to Customize your Printing

The AXIS 5470e/570/670e has a powerful facility for altering the 
print data. This means that your desired print format can be realized 
on any type of printer. The following actions can be invoked from the 
AXIS 5470e/570/670e:

•

The character set can be changed to suit the printer

•

Strings can be added before and after the print data

•

Strings within the print data can be substituted

•

ASCII to PostScript conversion

•

Redirection of print data to another printer if the printer is busy 
(AXIS 570/670e)

•

Hex Dump mode to assist with printing problems

•

Digital Copier support
(AXIS 5470e Copier model and AXIS 670e).

Logical Printer

Settings

If any of these actions are required, a Logical Printer is used to change 
the print data before being sent to the printer port. There are eight 
logical printers (PR1-PR8) that can be set up to filter the print data.

Configuring The

Logical Printer

Each logical printer can be set up using any standard Web browser or 
by directly editing the config file. 
To configure the logical printers from the web interface, click 

admin

 

and click the 

Logical Printer Settings

 button. Select the logical printer 

you wish to configure by clicking one of the tabs (PR1 - PR8). The 
available options will appear in these pages, depending on which print 
server model you have connected.

Summary of Contents for AXIS 570





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands