manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM is a powerful software for 3D modeling and animation. Enhance your creative projects with this comprehensive tool. Access the user manual for free and download it from manualshive.com to explore the full potential of this amazing product.

Share
Download
background image

Collision Test

Particle View

 on page 2811 > Click Collision in an event or add Collision to the

particle system and then select it.

Collision tests for particles that collide with one or more specified Deflector
space warps. It can also test whether a particle has slowed down or sped up
after one or more collisions, has collided more than once, and even whether
it will collide with a deflector in a specified number of frames.

The Collision test supports all deflector space warps except the DynaFlect
deflectors:

■

POmniFlect

 on page 2732

■

SOmniFlect

 on page 2743

■

UOmniFlect

 on page 2746

■

SDeflector

 on page 2751

■

UDeflector

 on page 2754

■

Deflector

 on page 2757

TIP

When testing for collisions with multiple deflectors, for best results, place all

the deflectors in a single Collision test. This tests for collisions with all the deflectors
simultaneously, and helps avoid possible missed collisions.

See also:

■

Collision Spawn Test

 on page 2964

Procedures

Example: To test for particles slowing down after one or more collisions:

In the real world, particles bouncing repeatedly against a surface lose kinetic
energy at each collision, and slow down gradually. Rather than testing for a
specific number of bounces, you can use the Is Slow After Collision(s) to test
whether particle speed has sunk below a specific level.

1

Start or reset 3ds Max. Set the animation length to 

500

 frames.

2960 | Chapter 14   Space Warps and Particle Systems

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

Canon PowerShot A410 Software Starter Manual preview
PowerShot A410
Brand: Canon Pages: 106
Altigen Altiware HPBX 5.0A Administration Manual preview
Altiware HPBX 5.0A
Brand: Altigen Pages: 490
JETWAY MAGICTWINXP-R10 Software Install Manual preview
MAGICTWINXP-R10
Brand: JETWAY Pages: 43
Tascam GigaStudio 3.04 Supplement Sheet preview
GigaStudio 3.04
Brand: Tascam Pages: 2
Xerox 701P40211 System Manual preview
701P40211
Brand: Xerox Pages: 110
F-SECURE MOBILE SECURITY 80 Series User Manual preview
MOBILE SECURITY 80 Series
Brand: F-SECURE Pages: 39
Novell DATA SYNCHRONIZER - UPDATE 1 Installation Manual preview
DATA SYNCHRONIZER - UPDATE 1
Brand: Novell Pages: 9
Novell PRIVILEGED USER MANAGER 2.2 Quick Start Manual preview
PRIVILEGED USER MANAGER 2.2
Brand: Novell Pages: 37
NEC V850 ZigBee Pro User Manual preview
V850 ZigBee Pro
Brand: NEC Pages: 59
NEC Storage Manager Configuration Setting Tool User'S Manual preview
Storage Manager Configuration Setting
Brand: NEC Pages: 68
NEC SpectraView User Manual preview
SpectraView
Brand: NEC Pages: 68
NEC Storage ReplicationControl SQL Option User Manual preview
Storage ReplicationControl SQL Option
Brand: NEC Pages: 104
NEC Storage Performance Monitor/Optimizer User Manual preview
Storage Performance Monitor/Optimizer
Brand: NEC Pages: 184
NEC Storage Manager IS015-9E User Manual preview
Storage Manager IS015-9E
Brand: NEC Pages: 200
NEC Storage Manager Messages Handbook preview
Storage Manager Messages
Brand: NEC Pages: 499
NEC Storage Manager Messages Handbook preview
Storage Manager
Brand: NEC Pages: 710
Sony D-NE329SP - Atrac Cd Walkman Portable Player Specifications preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Specifications preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands