manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM is a powerful software for 3D modeling and animation. Enhance your creative projects with this comprehensive tool. Access the user manual for free and download it from manualshive.com to explore the full potential of this amazing product.

Share
Download
background image

World rollout > Fracture Penetrations group

Several additional values govern fracture behavior. These are global in that
they apply to every rigid body added to a Fracture object, and are found in
the Utility panel > reactor > World rollout.

These values control the behavior of penetration depth collision detection
and response, and apply only to objects that are included in a Fracture helper.

Separation Time

Forces are applied to penetrating bodies that are strong

enough so the bodies become separated within the time specified. To simulate
an explosion effect, make this value very small and reduce the Velocity Cap
value.

Velocity Cap

reactor won't apply penetration recovery forces if they cause

the relative velocity between two penetrating bodies to exceed the specified
value.

Scale Tolerance

The collision tolerance for bodies that use the penetration

depth algorithm is determined by multiplying the 

Collision Tolerance value

on page 4088 by the value specified. If this value is negative, the collision
tolerance will extend inside the bodies, effectively shrinking the collision
geometry.

For more information about using these values, see the 

Fracture Tips

 on page

4017 topic.

Fracture Tips

After you procedurally slice up an object for fracture, the new pieces fit snugly
among each other. When one piece breaks loose after a fracture event, it might
be in contact with other pieces that are still part of the non-fractured body.
This can throw the broken piece into unstable oscillations against two or more
opposing pieces. The result is a chain-reaction throughout the fracture body,
with all the pieces flying off into space. It might appear as though some of
the pieces simply wink out of existence. Unlike normal rigid bodies in reactor,

reactor Objects | 4017

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

Panasonic PT-LW80NT Network Operation Manual preview
PT-LW80NT
Brand: Panasonic Pages: 69
Pioneer Serato Flip User Manual preview
Serato Flip
Brand: Pioneer Pages: 11
Altigen Call Detail Reporting Manual preview
Call Detail Reporting
Brand: Altigen Pages: 97
Altigen Altiware OE 4.5 System Administration & Installation Manual preview
Altiware OE 4.5
Brand: Altigen Pages: 455
AMIGOPOD AMIGOPOD 0.99.35 Integration Manual preview
AMIGOPOD 0.99.35
Brand: AMIGOPOD Pages: 23
AMIGOPOD AMIGOPOD Integration Manual preview
AMIGOPOD
Brand: AMIGOPOD Pages: 47
APPLIED ACOUSTICS SYSTEMS STRINGSTUDIO User Manual preview
STRINGSTUDIO
Brand: APPLIED ACOUSTICS SYSTEMS Pages: 70
Autodesk ARCHITECTURE 2010 Brochure preview
ARCHITECTURE 2010
Brand: Autodesk Pages: 4
Cabletron Systems SPECTRUM 1800 User Manual preview
SPECTRUM 1800
Brand: Cabletron Systems Pages: 232
Yamaha VE Owner'S Manual preview
VE
Brand: Yamaha Pages: 33
KAPERSKY ANTI-VIRUS 5.5 - FOR CHECK POINT FIREWALL-1 Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR CHECK POINT FIREWALL-1
Brand: KAPERSKY Pages: 141
Vector PC-Duo Manual preview
PC-Duo
Brand: Vector Pages: 148
Waves Linear-Phase MultiBand Software Audio... User Manual preview
Linear-Phase MultiBand Software Audio...
Brand: Waves Pages: 27
Lenovo ThinkCentre Edge 71z Hardware Maintenance Manual preview
ThinkCentre Edge 71z
Brand: Lenovo Pages: 182
Lenovo ThinkCentre Edge 91 Hardware Maintenance Manual preview
ThinkCentre Edge 91
Brand: Lenovo Pages: 262
Lenovo ThinkPad Edge E220s (German) Benutzerhandbuch preview
ThinkPad Edge E220s
Brand: Lenovo Pages: 202
Xerox Wide Format 6030 Setup Manual preview
Wide Format 6030
Brand: Xerox Pages: 20
Meridian Sooloos Collections Advanced Manual preview
Sooloos Collections
Brand: Meridian Pages: 75

Brands by name

Popular brands

Load more brands