manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM is a powerful software for 3D modeling and animation. Enhance your creative projects with this comprehensive tool. Access the user manual for free and download it from manualshive.com to explore the full potential of this amazing product.

Share
Download
background image

Bias

Lets you choose how to distribute the scaling variation within the

specified range or ranges. Default=None.

■

None

No bias; scaling variation is distributed equally through the range.

■

Centered

Scaling variation is concentrated near the middle of the range;

that is, at 0.0%.
With this choice, scaling will occur more frequently with low percentage
values than with ones near the values you set. In other words, most scaling
variants will be close to the specified scaling value.

■

Towards Minimum

Scaling variation is concentrated near the lower end

of the range (base-variation); that is, most scaling variants will be smaller
than the scaling value.

■

Towards Maximum

Scaling variation is concentrated near the upper end

of the range (base+variation); that is, most scaling variants will be larger
than the scaling value.

Animation Offset Keying group

If you animate the Scale Factor or the Scale Variation settings or both, the
software can begin applying this animation to all particles as of the start frame
of the animation or the first frame of the current event, or to each particle
based on its age. For instance, if you set Sync By to Particle Age, and set Scale
Factor keys at frames 0 and 30, then the software will animate the scaling
factor for each particle between its birth and its 30th frame of existence, if the
particle is in the scaling event or a prior event. Following this example, any
particle that has already reached its 30th frame of existence before reaching
the event will enter the event fully scaled. That is, the software will apply the
Scale Factor value that you set at frame 30 to each particle aged 30 or above
at the moment it enters the scaling event. However, any particle that leaves
the scaling event before reaching age 30 will stop scaling as of its exit frame.
In other words, with respect to particles in other events, animation of action
parameters is retroactive, but not post-active.

Alternatively, if you set Sync By to Absolute Time, the scaling is animated
from frame 0 to frame 30 of the animation, regardless of particle age, and even
if no particles are in the event at that time. Or, if you set Sync By to Event
Duration, the scaling animation is applied to each particle as of the time that
it enters the event.

2870 | Chapter 14   Space Warps and Particle Systems

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

IBM Nways 8260 Installation Instructions Manual preview
Nways 8260
Brand: IBM Pages: 25
Quantum GoVault 40GB User Manual preview
GoVault 40GB
Brand: Quantum Pages: 91
Samsung MZ-7PC128N User Manual preview
MZ-7PC128N
Brand: Samsung Pages: 59
Blackberry WINDOWS LIVE MESSENGER - LEARN MORE User Manual preview
WINDOWS LIVE MESSENGER - LEARN MORE
Brand: Blackberry Pages: 18
Lexicon MPX NATIVE REVERB PLUG-IN Owner'S Manual preview
MPX NATIVE REVERB PLUG-IN
Brand: Lexicon Pages: 24
F-SECURE ANTI-VIRUS FOR WINDOWS SERVERS 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR WINDOWS SERVERS 9.00
Brand: F-SECURE Pages: 48
Red Hat CERTIFICATE SYSTEM 7.2 - AGENT GUIDE Manual preview
CERTIFICATE SYSTEM 7.2 - AGENT GUIDE
Brand: Red Hat Pages: 73
TANDBERG GW Dataport Command Interface D13202 User Manual preview
GW Dataport Command Interface D13202
Brand: TANDBERG Pages: 32
FARONICS DEEP FREEZE ENTERPRISE Manual preview
DEEP FREEZE ENTERPRISE
Brand: FARONICS Pages: 104
Waves Digital Audio Effects Processor Doubler User Manual preview
Digital Audio Effects Processor Doubler
Brand: Waves Pages: 6
Juniper NETWORK AND SECURITY MANAGER Manual preview
NETWORK AND SECURITY MANAGER
Brand: Juniper Pages: 340
Garmin eTrex Vista C Software Manual preview
eTrex Vista C
Brand: Garmin Pages: 4
Canon CanoScan FB620P User Manual preview
CanoScan FB620P
Brand: Canon Pages: 36
JVC GZ-MG505US - Camcorder - 1.33 MP Instructions Manual preview
GZ-MG505US - Camcorder - 1.33 MP
Brand: JVC Pages: 72
Kenwood KDC-MP535U Service Manual preview
KDC-MP535U
Brand: Kenwood Pages: 44
Lenovo ThinkPad X301 Hardware Maintenance Manual preview
ThinkPad X301
Brand: Lenovo Pages: 154
Sharp AR-PB2 Operation Manual preview
AR-PB2
Brand: Sharp Pages: 60
Sharp e-Copy ShareScan Installation & Setup Instructions Manual preview
e-Copy ShareScan
Brand: Sharp Pages: 38

Brands by name

Popular brands

Load more brands