manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File, Page: 2126 / 2577

Share
Download
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File Download Page 2126

Master Motion Clip

Master Motion Clips are controllers that contain 

motion clips

, or individual

clips of animation. These motion clips are sequenced to create animation, and
overlap slightly with automatic blending to smooth the transitions between
clips.

Procedures

To use Motion Synthesis with non-bipedal creatures:

All of the work involved in copying and synthesizing clips takes place using
controls in the 

Synthesis dialog

 on page 4925. This dialog has three tabs: Motion

Clips, State, and Synthesis.

This procedure assumes that the global object is static and has animation that
loops. For creatures with many legs, you can animate lateral motion on the
global object and then strip out the lateral motion with the Synthesis dialog.
This latter approach serves to minimize foot sliding in a multi-legged creature.

1

Animate an object.

Create animation in one position, like a bird's beating wings. Create a
variety of animation like a gliding motion (wings still), wings beating
slowly, and so on. To animate the object, apply modifiers and animate
their parameters.

This will be the Global object, from which animation clips will be derived.

2

Using the Create panel > Helpers > Object Type rollout, add a Crowd
object and a Delegate object.

Create the objects in the Top or Perspective viewport.

3

Use 

Scatter Objects

 on page 4823 in Crowd function to clone the delegate

and optionally distribute the clones (you can also distribute them
manually).

Make sure you end up with an equal number of delegates and animated
object clones.

Next, associate and link the objects to the delegates.

4

 On the Setup rollout, click the Object/Delegate Associations button.

The 

Object/Delegate Associations dialog

 on page 4836 appears.

5

Add the objects and delegates into their respective columns.

Using Motion Synthesis | 4807

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments