manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File, Page: 204 / 2577

Share
Download
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File Download Page 204

if you set Sync By to Particle Age, and set Speed Variation keys at frames 0
and 30, then the software will animate the speed variation for each particle
born while the event is active between its birth and its 30th frame of existence.
Alternatively, if you set Sync By to Absolute Time, the speed variation is
animated from frame 0 to frame 30 of the animation, even if no particles are
in the event at that time. Or, if you set Sync By to Event Duration, the speed
variation animation is applied to each particle as of the time that it enters the
event. For further information, see 

Animation Offset Keying group

 on page

2870.

Sync By

Choose the time frame for applying animated parameters:

■

Absolute Time

Any keys set for parameters are applied at the actual frames

for which they're set.

■

Particle Age

Any keys set for parameters are applied at the corresponding

frames of each particle's existence.

■

Event Duration

Any keys set for parameters are applied to each particle

relative to the frame at which it first enters the event.

Icon Animation group

The software can begin applying animation of the Speed By Icon operator
icon to all particles as of the start frame of the animation or the first frame of
the current event, or to each particle based on its age. For an explanation, see

Animation Offset Keying group

 on page 2870.

Sync By

Choose the time frame for applying animation of the icon to the

particles:

■

Absolute Time

Any keys set for icon motion are applied at the actual

frames for which they're set.

■

Particle Age

Any keys set for icon motion are applied at the corresponding

frames of each particle's existence.

■

Event Duration

Any keys set for icon motion are applied to each particle

relative to the frame at which it first enters the event.

Icon Size

Sets the size of the operator icon. This setting is for visibility only;

it doesn't affect particle behavior.

Uniqueness group

The Uniqueness setting enables randomization of the speed variation range.

Particle Flow | 2885

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments