manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM is a powerful software for 3D modeling and animation. Enhance your creative projects with this comprehensive tool. Access the user manual for free and download it from manualshive.com to explore the full potential of this amazing product.

Share
Download
background image

Interface

Modifier Stack

Parent Space

At this sub-object level, you can move and rotate the

representations of spin and suspension axes for the chassis. This describes
where on the chassis the wheel is attached and also the directions of the spin
and suspension axes for the chassis. This is defined in chassis space, which
means that if you alter the position or rotation of the chassis the axes will
move as well and maintain their offset rotation and translation with respect
to the chassis. When you assign a chassis to the car-wheel constraint, Chassis
Space’s translation is set to the wheel’s pivot point, the spin axis is aligned to
the wheel’s X axis, and the suspension axis is aligned to its Z axis. If the
car-wheel constraint is single-bodied, then Chassis Space represents the world
orientation and position of the constraint.

Child Space

At this sub-object level, you can move and rotate the

representation of the constraint for the wheel. This describes both the location
on the wheel that the constraint considers as its attachment point and the
rotation of the spin axis for the wheel. This is defined in wheel space, which
means that if you alter the position or rotation of the wheel the space moves
as well and maintains its offset rotation and translation with respect to the
wheel. When you assign a wheel body to the Car-Wheel constraint, Wheel
Space’s translation is set to the wheel’s pivot point and the wheel’s spin axis
is aligned to its X axis.

Suspension Rotation

This level allows independent rotation of the suspension

axis with respect to the Chassis Space. This means that your suspension axis
doesn’t have to be perpendicular to your spin axis, allowing for a greater range
of constraint setups.

3992 | Chapter 16   reactor

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

Canon EOS-1D Mark II Digial Software Manual preview
EOS-1D Mark II Digial
Brand: Canon Pages: 2
F-SECURE MOBILE SECURITY FOR WINDOWS MOBILE - Quick Manual preview
MOBILE SECURITY FOR WINDOWS MOBILE -
Brand: F-SECURE Pages: 4
F-SECURE MOBILE SECURITY FOR UIQ - Quick Manual preview
MOBILE SECURITY FOR UIQ -
Brand: F-SECURE Pages: 3
F-SECURE MOBILE SECURITY 6 FOR WINDOWS MOBILE - Quick Manual preview
MOBILE SECURITY 6 FOR WINDOWS MOBILE -
Brand: F-SECURE Pages: 5
F-SECURE MOBILE SECURITY 6 FOR S60 - Quick Manual preview
MOBILE SECURITY 6 FOR S60 -
Brand: F-SECURE Pages: 5
F-SECURE CLIENT SECURITY 7.00 Administrator'S Manual preview
CLIENT SECURITY 7.00
Brand: F-SECURE Pages: 315
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00 Deployment Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00
Brand: F-SECURE Pages: 115
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 - Administrator'S Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -
Brand: F-SECURE Pages: 349
F-SECURE ANTI-VIRUS - FOR MICROSOFT EXCHANGE Administrator'S Manual preview
ANTI-VIRUS - FOR MICROSOFT EXCHANGE
Brand: F-SECURE Pages: 224
Inalp Networks SmartWare R2.00 Software Configuration Manual preview
SmartWare R2.00
Brand: Inalp Networks Pages: 321
GARDINER TECHNOLOGY GARDTEC SPEECH DIALLER Installation & Programming Instructions preview
GARDTEC SPEECH DIALLER
Brand: GARDINER TECHNOLOGY Pages: 38
Mitsubishi DX-PC3 Instruction Manual preview
DX-PC3
Brand: Mitsubishi Pages: 38
Vaisala DigiCORA 3.64 Technical Note preview
DigiCORA 3.64
Brand: Vaisala Pages: 22
Intergraph InterSite Quick Start Manual preview
InterSite
Brand: Intergraph Pages: 46
Extreme Networks EPICenter 4.1 Software Installation Manual preview
EPICenter 4.1
Brand: Extreme Networks Pages: 546
Extreme Networks ExtremeWare 7.5 Command Reference Manual preview
ExtremeWare 7.5
Brand: Extreme Networks Pages: 2546
M-Audio GForce M-Tron Pro Quick Start Manual preview
GForce M-Tron Pro
Brand: M-Audio Pages: 4
M-Audio DRUM AND BASS RIG (German) Kurzanleitung preview
DRUM AND BASS RIG
Brand: M-Audio Pages: 3

Brands by name

Popular brands

Load more brands