manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File, Page: 2254 / 2577

Share
Download
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File Download Page 2254

set Blend Start to the frame in the “from” clip at which blending should begin.
Alternatively, use Auto Blend or Auto Blend All to have 

character studio

determine the best blend points.

If you use Auto Blend, you can then see the calculated blend start point for
each pair of clips by choosing the clips from the drop-down lists.

From Clip list

Lets you select the starting clip to blend; the clip to blend 

from

.

To Clip list

Lets you select the ending clip to blend; the clip to blend 

to

.

Blend Start

Displays the frame in the From clip at which the transition is to

begin, whether the default, calculated, or set manually, and lets you change
the start frame.

Auto Blend

Automatically sets the Blend Start frame for the current From and

To clips.

Auto Blend All

Automatically sets the Blend Start frames for all possible pairs

of clips.

OK

Accepts changes and closes the dialog.

MotionClip Parameters Dialog

Open Track View. > Global Tracks > Block Control > GlobalClip Properties >
Synthesis dialog > Motion Clips panel > Click New (in the From Global Object
group). > Motion Clip Parameters dialog

Select a Crowd helper. > Modify panel > Global Clip Controllers rollout > New
> Choose a GlobalClip object. > Select the object in the list. > Edit > Synthesis
dialog > Motion Clips panel > Click New (in the From Global Object group).
> Motion Clip Parameters dialog

When setting up a crowd simulation with non-bipedal characters using motion
synthesis, use this dialog, accessed from the 

Synthesis Dialog

 on page 4925, to

define motion clips from the Global Object's animation.

Enter a clip name, frame range, and color using controls in the MotionClip
Parameters dialog. The software determines which clips to trigger by states
that you define on the 

State panel

 on page 4929.

Crowd Animation User Interface | 4935

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments