manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File, Page: 1531 / 2577

Share
Download
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File Download Page 1531

The following rules apply to the editing biped body key timing in Track View:

■

You cannot move existing keys outside the area between the first and last
footsteps, or to negative frames.

■

You can use Add Keys to add keys to any biped body track. You cannot
add keys outside the area between the first and last footsteps, or to negative
frames.

■

You can clone keys the same way you clone 3ds Max object keys, by
selecting keys and holding down 

Shift

 as you drag them. You can also clone

keys by copying and pasting postures. See 

Copying and Pasting Postures

and Poses 

 on page 4281.

■

The Track View – Curve Editor can be used to view and edit curves showing
the interpolation between body keys. You can also use the Workbench to
analyze, edit and fix biped motion curves. See 

Working with the

Workbench

 on page 4476.

■

You can use Scale Keys to scale selected keys, except for locked keys.

TIP

If you want to animate a biped performing movements with its upper body

while standing, extend the length of the standing footsteps to cover the length
of the standing animation, then add keys for the upper body.

See also:

■

Animating the Upper Body

 on page 4209

Shifting the Biped's Balance

After footsteps are activated, you can adjust the biped's overall balance in
either of two ways:

■

 In the 

Biped rollout

 on page 4331, turn on Rubber Band Mode and

move the biped's COM, or

■

Change or animate the Balance Factor parameter in the 

Key Info rollout

on page 4367.

4212 | Chapter 17   character studio

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments