manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File, Page: 2446 / 2577

Share
Download
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File Download Page 2446

Increasing the Shadow Quality value produces a more accurate penumbra (soft area)
within the contour defined by the Shadow Integrity value.

Sample Spread

The radius, in pixels, to blur the antialiased edge.

NOTE

As this value increases, so does the quality of the blur. However, increasing

this value also increases the likelihood of missing small objects. To avoid this
problem, increase the value of Shadow Integrity.

Shadow Bias

The minimum distance that an object must be from the point

being shaded in order to cast a shadow. This prevents blurred shadows from
affecting surfaces they shouldn't.

NOTE

As you increase the blur value, you should also increase the bias.

Jitter Amount

Adds randomness to the ray positions. The rays are initially in

a very regular pattern, which can show up in the blurry part of the shadow
as regular artifacts. Jittering will convert these artifacts to noise, which is
generally less noticeable to the eye. Recommended values are 0.25 to 1.0.
However, very blurry shadows require more jitter.

Shadow Types and Shadow Controls | 5127

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments