manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File, Page: 1654 / 2577

Share
Download
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File Download Page 1654

NOTE

Rubber Band mode behaves differently than Non-Uniform Scale. For

example, if you "Rubber-Band" the biped thigh, the thigh and biped calf objects
scale proportionally to keep the biped foot stationary. Using Non-Uniform Scale,
the calf retains its scale and the foot moves.

Moving the biped center of mass (blue diamond) behind the character, turns this
default walk cycle into a struggle against a high wind.

 Scale Stride Mode

 Footstep stride length and width are scaled to match

the stride length and width of the biped figure. Scale Stride mode is on by
default.

 Displays when Scale Stride mode is 

off

.

Scale Stride mode is on by default, so scaling occurs automatically when you
load a .

bip

, .

stp

, or .

fig 

file. Scaling occurs when you paste footsteps and when

you scale the biped’s legs or pelvis.

For example, if you load a .

bip

 file that was saved from a larger biped, the

footsteps come into your current scene scaled to match the selected smaller
biped. If Scale Stride mode is off, the footsteps come into the current scene
without being scaled down.

If you turn off Scale Stride mode and then go into Figure mode and scale the
biped up or down, the footstep stride width and length remains the same
when you exit Figure mode.

Biped User Interface | 4335

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments