manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM is a powerful software for 3D modeling and animation. Enhance your creative projects with this comprehensive tool. Access the user manual for free and download it from manualshive.com to explore the full potential of this amazing product.

Share
Download
background image

To fit biped legs to the skin:

1

 Turn on Figure mode on the Biped rollout.

2

Use the Scale Transform gizmo to scale the Z-axis of the biped’s pelvis so
the biped’s leg links are centered in each leg of the skin.

3

Select the biped’s two thigh links (LLeg and RLeg) and scale the X-axis
of the thigh links so they end at the knees of the skin.

4

Select the biped’s two lower leg links (LLeg1 and RLeg1), and scale the
X-axis of the lower leg links so the biped’s ankles are level with the ankles
of the skin.

TIP

When the two upper legs are selected, you can press Page Down to select

the lower legs.

5

In a left or right viewport, scale the biped’s feet so their profile roughly
matches the profile of the feet of the skin.

6

Scale toes or move them along their local X-axis so each toe is aligned
with the corresponding toe in the skin.

The ends of the final toe links should go through the tips of the skin’s
toes.

You might have to change the number of biped toes to match the number
of skin toes. A biped must have at least one toe on each foot. If the skin
has no toes or the character is wearing footgear, the position and number
of biped toes doesn’t matter, but they should still extend beyond the
skin.

TIP

During the fitting process, try Freezing the skin object to prevent

accidental selection.

To fit the spine to the skin torso:

1

 On the Biped rollout, turn on Figure mode.

2

Select the lowest link of the spine (Bip01 Spine). Choose the Move
transform, constrain movement to the spine link’s local X-axis, and move
it vertically to the waist of the skin, just below the navel.

4164 | Chapter 17   character studio

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

3M 740 Software preview
740
Brand: 3M Pages: 3
Blamsoft VK-1 Viking User Manual preview
VK-1 Viking
Brand: Blamsoft Pages: 28
KAPERSKY ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER Administrator'S Manual preview
ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER
Brand: KAPERSKY Pages: 67
Red Hat ENTERPRISE LINUX WS 2.1 - Installation Manual preview
ENTERPRISE LINUX WS 2.1 -
Brand: Red Hat Pages: 110
Emerson Smart Wireless Navigator Reference Manual preview
Smart Wireless Navigator
Brand: Emerson Pages: 22
Emerson Site Manager User Manual preview
Site Manager
Brand: Emerson Pages: 130
Valgrind BBV Quick Start Manual preview
BBV
Brand: Valgrind Pages: 319
ASCOM DURAALARM - 1 Brochure preview
DURAALARM - 1
Brand: ASCOM Pages: 28
Dell External OEMR 2800 Deployment Manual preview
External OEMR 2800
Brand: Dell Pages: 32
Dell Encryption Key Manager Setup Manual preview
Encryption Key Manager
Brand: Dell Pages: 66
Dell External OEMR 2950 Deployment Manual preview
External OEMR 2950
Brand: Dell Pages: 22
Dell Jog Shuttle Manual preview
Jog Shuttle
Brand: Dell Pages: 10
Dell DVS Simplified Appliance Reference preview
DVS Simplified Appliance
Brand: Dell Pages: 73
Dell Latitude E6540 Owner'S Manual preview
Latitude E6540
Brand: Dell Pages: 75
Dell External OEMR 850 User Manual preview
External OEMR 850
Brand: Dell Pages: 162
Dell External OEMR 2850 User Manual preview
External OEMR 2850
Brand: Dell Pages: 176
nordic edge ASA 5500 Installation Manual preview
ASA 5500
Brand: nordic edge Pages: 49
2Wire Wireless PCI Adapter Driver Installation Instructions preview
Wireless PCI Adapter Driver
Brand: 2Wire Pages: 4

Brands by name

Popular brands

Load more brands