manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM is a powerful software for 3D modeling and animation. Enhance your creative projects with this comprehensive tool. Access the user manual for free and download it from manualshive.com to explore the full potential of this amazing product.

Share
Download
background image

Achieving Particle Motion Blur

Particle motion blur is actually the result of varying the opacity and the length
of particles based on their speed. To accomplish this requires coordination
between material assignment and the settings in the particle systems. Follow
these instructions:

■

Use the 

Particle MBlur map

 on page 5891 in the material that you assigned

to the particles. For best results, assign it as an opacity map.

■

Make sure that the particle system, PArray, PCloud, and Super Spray, or
Spray, supports the Particle MBlur map.

■

Choose Rotation and Collision rollout > Spin Axis Controls group >
Direction of Travel/Mblur option.

■

In this same group, set the Stretch spinner greater than 0 to stretch the
particles as a percent of their length based on the particle Speed setting.

■

Use the correct type of particle. MBlur works on all particle types except
Constant and Facing.

NOTE

Instanced objects with multi/sub-object materials cannot be image

motion blurred.

Using Mapped Materials with Particle Systems

Mapped materials affect particles differently, depending on the source of the
material.

3010 | Chapter 14   Space Warps and Particle Systems

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

Samsung UN40C7000WF User Manual preview
UN40C7000WF
Brand: Samsung Pages: 7
Barracuda Networks NG Network Access Client SP4 Migration Instructions preview
NG Network Access Client SP4
Brand: Barracuda Networks Pages: 10
AMX I!-FTPSENDER Instruction Manual preview
I!-FTPSENDER
Brand: AMX Pages: 12
AMX WebLinx Instruction Manual preview
WebLinx
Brand: AMX Pages: 50
Novation V-Station User Manual preview
V-Station
Brand: Novation Pages: 93
Dragon Systems DRAGON NATURALLYSPEAKING PROFESSIONAL 5 Manual preview
DRAGON NATURALLYSPEAKING PROFESSIONAL 5
Brand: Dragon Systems Pages: 222
DataCard Tru Photo Datasheet preview
Tru Photo
Brand: DataCard Pages: 2
AVG LINKSCANNER User Manual preview
LINKSCANNER
Brand: AVG Pages: 47
AVG ANTI-VIRUS 2011 - REV 2011.11 User Manual preview
ANTI-VIRUS 2011 - REV 2011.11
Brand: AVG Pages: 209
F-SECURE POLICY MANAGER 8.0 Administrator'S Manual preview
POLICY MANAGER 8.0
Brand: F-SECURE Pages: 221
GRASS VALLEY NetConfig Instruction Manual preview
NetConfig
Brand: GRASS VALLEY Pages: 44
KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL... User Manual preview
ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL...
Brand: KAPERSKY Pages: 295
Calyx Point 7 User Manual preview
Point 7
Brand: Calyx Pages: 537
Canon Powershot SX20 IS Getting Started preview
Powershot SX20 IS
Brand: Canon Pages: 44
Canon MLT (F) User Manual preview
MLT (F)
Brand: Canon Pages: 40
Canon iR Series User Manual preview
iR Series
Brand: Canon Pages: 46
Canon Mk2500 User Manual preview
Mk2500
Brand: Canon Pages: 157
Canon Networked Multi-Projection Set Up And Instructions Manual preview
Networked Multi-Projection
Brand: Canon Pages: 73

Brands by name

Popular brands

Load more brands