manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File, Page: 1689 / 2577

Share
Download
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File Download Page 1689

TIP

 Right-click to open the 

Planted Key Defaults dialog

 on page ?, which lets

you set new default values for subsequent TCB keys.

 Set Sliding Key

Sets a biped key with IK Blend=1, Join To Previous IK

Key turned off, and Object selected in the IK group. This creates a sliding
footstep. Sliding footsteps display in the viewports with a line running through
the middle of the footstep. Sliding footsteps are understood as footsteps with
moving IK constraints.

In a Footstep or Freeform animation, if the foot slides rather than being
planted, use Set Sliding Key.

TIP

 Right-click to open the 

Sliding Key Defaults dialog

 on page ?, which lets

you set new default values for subsequent TCB keys.

 Set Free Key

Sets a biped key with IK Blend=0, Join To Previous IK Key

turned off, and Body selected in the IK group.

In a Footstep or Freeform animation, a biped leg in a move state should have
a “free” key.

TIP

 Right-click to open the 

Free Key Defaults dialog

 on page ?, which lets you

set new default values for subsequent TCB keys.

To change the default values for TCB keys, right-click either Set Planted Key,
Set Sliding Key, or Set Free Key to open the respective dialog.

Use

When on, subsequent keys set with either Set Planted Key, Set Sliding

Key, or Set Free Key use the TCB values from the respective dialog. Otherwise,
the system uses the default values.

Tension

Controls the amount of curvature in the animation curve. Default=25.

Continuity

Controls the tangential property of the curve at the key.

Default=25.

4370 | Chapter 17   character studio

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments