manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM is a powerful software for 3D modeling and animation. Enhance your creative projects with this comprehensive tool. Access the user manual for free and download it from manualshive.com to explore the full potential of this amazing product.

Share
Download
background image

Foot-Based Transitions with 3ds Max Objects

For foot-based motions, follow this overall workflow:

1

Find a good place to start and end the transition.

2

Create the transition with this timing.

3

Choose the parent object to be a velocity blend object.

4

Choose the model's feet to be sub-blend objects.

5

Optimize the transition.

Procedures

To create a transition between two clips:

1

Right-click an existing track to insert a Transition track or convert the
current track to a Transition track.

2

Right-click the track and choose New Clips > From Files from the pop-up
menu. Choose at least two clips to load.

The clips are placed on the transition track with transitions between
them.

3

Drag the transition to move it, or drag its ends to resize it.

4

Before adding the next clip, move the last clip's transition bracket to the
next desired transition location, and then load the clip.

To optimize a transition:

With foot-based clips, you can use the 

Optimize command

 on page 3758 to help

you find the best timing for a transition. The Optimize command exhaustively
searches the specified time period for times when the foot positions match
most closely.

TIP

A good workflow is to look at the clips individually to find the best approximate

time for a transition, then use Optimize to fine-tune the timing.

1

Create a transition between clips at approximately the right location on
the track.

2

Right-click the transition and choose Optimize from the pop-up menu.

The 

Transition Optimization dialog

 on page 3774 appears.

Using the Motion Mixer | 3729

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

Samsung 4116 - SCX B/W Laser Manual preview
4116 - SCX B/W Laser
Brand: Samsung Pages: 14
Samsung 2252W - Printer - B/W Manual preview
2252W - Printer - B/W
Brand: Samsung Pages: 10
Samsung HXDU010EB - Story Station 1 TB External Hard... User Manual preview
HXDU010EB - Story Station 1 TB External Hard...
Brand: Samsung Pages: 7
FARONICS ANTI-EXECUTABLE ENTERPRISE Manual preview
ANTI-EXECUTABLE ENTERPRISE
Brand: FARONICS Pages: 68
Juniper JUNOS PUS MOBILE SECURITY SUITE Datasheet preview
JUNOS PUS MOBILE SECURITY SUITE
Brand: Juniper Pages: 6
FARONICS DEEP FREEZE - INTEGRATING WITH ALTIRIS... Manual preview
DEEP FREEZE - INTEGRATING WITH ALTIRIS...
Brand: FARONICS Pages: 22
Ken A Vision Applied Vision 4 Instruction Manual preview
Applied Vision 4
Brand: Ken A Vision Pages: 16
Partec PARASTATION5 V5 Administrator'S Manual preview
PARASTATION5 V5
Brand: Partec Pages: 98
DAVIS Weather Talker User Manual preview
Weather Talker
Brand: DAVIS Pages: 49
Lucent Technologies INTUITY Messaging Solutions Manual preview
INTUITY Messaging Solutions
Brand: Lucent Technologies Pages: 80
Patton electronics ForeSight 6300 NMS Administrator'S Reference Manual preview
ForeSight 6300 NMS
Brand: Patton electronics Pages: 156
Cisco TELEPRESENCE MANAGEMENT SUITE EXTENSION - FOR IBM LOTUS NOTES V11.3.1 Installation And Getting Started Manual preview
TELEPRESENCE MANAGEMENT SUITE EXTENSION - FOR IBM LOTUS NOTES V11.3.1
Brand: Cisco Pages: 45
Cisco TELEPRESENCE MANAGEMENT SUITE Installation And Getting Started Manual preview
TELEPRESENCE MANAGEMENT SUITE
Brand: Cisco Pages: 70
Waves GTR Solo User Manual preview
GTR Solo
Brand: Waves Pages: 29
Adaptec 1684800 - EZ-SCSI Deluxe User Manual preview
1684800 - EZ-SCSI Deluxe
Brand: Adaptec Pages: 9
Adaptec CDP-00278-01-A User Manual preview
CDP-00278-01-A
Brand: Adaptec Pages: 130
Canon DC22 - 2.2MP DVD Camcorder Instruction Manual preview
DC22 - 2.2MP DVD Camcorder
Brand: Canon Pages: 98
McAfee VirusScan Datasheet preview
VirusScan
Brand: McAfee Pages: 2

Brands by name

Popular brands

Load more brands