manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM is a powerful software for 3D modeling and animation. Enhance your creative projects with this comprehensive tool. Access the user manual for free and download it from manualshive.com to explore the full potential of this amazing product.

Share
Download
background image

This ability to preserve interdependent relationships allows you easily to
experiment and improvise with motion, since you are assured that edits to
one body part will not corrupt the integrity of other parts.

In general, changes to the center of mass, spine, and pelvis cause the legs to
adjust. Changes to the legs do not affect the center of mass's vertical position.

Adjusting Body Keys in Track View

When you activate footsteps, keys are created for biped body parts. After
activating footsteps, you can also create keys by turning on Auto Key and
animating body parts. All these keys can be viewed in Track View – Dope Sheet
mode.

In general, editing biped body keys in Track View is the same as editing keys
of any sort in 3ds Max, with a few restrictions.

Before reading this section, please read 

Understanding Footstep and Body Keys

on page 4196 for terms and definitions used in this section.

NOTE

The information in this section applies only to biped body keys for the arms,

legs, spine, neck, and other parts of the upper body. For rules for editing footstep
keys, see 

Editing Footstep Timing

 on page 4200.

Locked Keys

Some biped keys are locked, meaning they cannot be moved in time. Locked
keys are colored red in Track View.

Locked keys for the COM Body Vertical track are created at each footstep's lift
and touch frames. These are the only keys that are locked. These keys can be
moved in time by changing footstep duration in Track View.

Although you cannot move or delete a locked key in Track View, you can
sometimes change the animation on the frame by going to the frame, turning
on Auto Key and manually animating the key.

Restrictions on Biped Body Key Editing

All options available for editing biped body key timing are available only when
Edit Keys on the Track View toolbar is turned on.

Footstep Animation | 4211

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

Autodesk AUTOCAR CIVIL 2010 Brochure preview
AUTOCAR CIVIL 2010
Brand: Autodesk Pages: 6
Waves API 550 User Manual preview
API 550
Brand: Waves Pages: 20
Dragon Systems DRAGON NATURALLYSPEAKING ESSENTIALS Quick Start Manual preview
DRAGON NATURALLYSPEAKING ESSENTIALS
Brand: Dragon Systems Pages: 26
Olympus Master 4.1 Operating Instructions Manual preview
Master 4.1
Brand: Olympus Pages: 149
I-Data ReRouter Installation & Operator’S Manual preview
ReRouter
Brand: I-Data Pages: 79
Fortinet FortiClient Datasheet preview
FortiClient
Brand: Fortinet Pages: 4
Raining Data Corporation mvEnterprise 4.1.0 on AIX Installation Manual preview
mvEnterprise 4.1.0 on AIX
Brand: Raining Data Corporation Pages: 64
GRASS VALLEY AURORA INGEST 7 Datasheet preview
AURORA INGEST 7
Brand: GRASS VALLEY Pages: 4
GRASS VALLEY Aurora Browse Upgrade Instructions preview
Aurora Browse
Brand: GRASS VALLEY Pages: 42
Red Hat ENTERPRISE LINUX 4.5.0 - Reference Manual preview
ENTERPRISE LINUX 4.5.0 -
Brand: Red Hat Pages: 434
Bay Networks Multilink PPP Administrator'S Manual preview
Multilink PPP
Brand: Bay Networks Pages: 22
Oracle HTTP Server Administrator'S Manual preview
HTTP Server
Brand: Oracle Pages: 224
Cabletron Systems IRM-2/LM User Manual preview
IRM-2/LM
Brand: Cabletron Systems Pages: 36
MACROMEDIA CONTRIBUTE Manual preview
CONTRIBUTE
Brand: MACROMEDIA Pages: 21
Ulead PYRO1394WebCam User Manual preview
PYRO1394WebCam
Brand: Ulead Pages: 24
KAPERSKY ANTI-VIRUS 5.0 - FOR LOTUS NOTES-DOMINO User Manual preview
ANTI-VIRUS 5.0 - FOR LOTUS NOTES-DOMINO
Brand: KAPERSKY Pages: 137
Paradyne Jetstream CPX-1000 User Manual preview
Jetstream CPX-1000
Brand: Paradyne Pages: 240
CA ARCserve Backup Manual preview
ARCserve Backup
Brand: CA Pages: 69

Brands by name

Popular brands

Load more brands