manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File, Page: 922 / 2577

Share
Download
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File Download Page 922

Interface

Select from the options for repeating your animation and options for applying
a linear value.

Constant

Holds the value of the end key of the range for all frames. Use

constant when you want no animated effect before the first key of the range
or after the last key. Constant is the default out-of-range type.

Cycle

Repeats the same animation as within the range. If the first and last

keys in the range have different values, the animation will show an abrupt
"jump" from the last key to the first. Use Cycle when you want an animation
to repeat, but do not need the ends to match.

Loop

Repeats the same animation as within the range, but interpolates between

the last key and first key in the range to create a smooth loop. If the first and
last key are both at the extreme ends of the range, Loop will behave exactly
like Cycle. If you use Position Ranges to extend the range bar beyond the keys,
the added length determines the amount of time used to interpolate between
the last key and the first key. Use loop with an extended range bar to produce
smoothly repeating animation.

Ping Pong

Alternates between a forward and backward repeat of the animation

within the range. Use Ping Pong when you want your animation to alternate
back and forth.

Track View Toolbars | 3603

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments