manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File, Page: 20 / 2577

Share
Download
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Help File Download Page 20

Period 1

The time over which the noise variation makes a full cycle. For

example, a setting of 20 means one cycle per 20 frames.

Amplitude 1

The strength of the variation (in percent). This option uses the

same types of units as the Basic Torque spinner.

Phase 1

Offsets the variation pattern.

Period 2

The next two spinners provide an additional variation pattern to

increase the noise.

Amplitude 2

The strength of the variation of the second wave in (percent).

This option uses the same types of units as the Basic Torque spinner.

Phase 2

Offsets the variation pattern of the second wave.

Particle Effect Range group

Lets you restrict the Motor effect's range to a specific spherical volume. This
affects particles systems only; it has no effect on dynamics.

Enable

When on, limits the range of the effect to a sphere, displayed as a

tri-hooped sphere. The effect falls off increasingly as the particles near the
boundary of the sphere.

Range

Specifies the radius of the range of the effect, in units.

Display Icon group

Icon Size

Sets the size of the Motor icon. This is for display purposes only,

and does not alter the Motor effect.

Vortex Space Warp

Create panel > Space Warps > Forces > Object Type rollout > Vortex

Create menu > Space Warps > Forces > Vortex

The Vortex space warp applies a force to 

particle systems

 on page 2795, spinning

them through a whirling vortex, and then moving them down a long, thin
spout or 

vortex well

. Vortex is useful for creating black holes, whirlpools,

tornadoes, and other funnel-like objects.

The space warp settings let you control the vortex shape, the well
characteristics, and rate and range of particle capture. The shape of the vortex
is also affected by particle system settings, such as speed.

Forces | 2701

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments