manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Help File

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM is a powerful software for 3D modeling and animation. Enhance your creative projects with this comprehensive tool. Access the user manual for free and download it from manualshive.com to explore the full potential of this amazing product.

Share
Download
background image

2953 if it defines the rotation channel) in the same event. In this situation, the
Go To Rotation test can grab the particle rotational component before the
orientation-type operator overwrites it. The Go To Rotation operator modifies
the particle orientation and spinning in the post-evaluation cycle. For an
example, see the procedure below.

WARNING

The Go To Rotation test is not compatible with the Spin, Shape Facing,

and Shape Mark operators. Do not use any of these operators in the same event
with a Go To Rotation test.

NOTE

You can define the transition period only in terms of time. You cannot set

the test to come to a specific rotation by the time of another test, such as a collision
test. Also, limited control is provided over the axis of spinning when a particle
comes to the final rotation.

Procedures

Example: To make falling particles land smoothly, face up:

This procedure assumes a basic knowledge of Particle Flow usage.

1

In the Perspective viewport, add a Particle Flow system and raise its icon
about 80 units on the Z axis.

2

In Event 01, make the following changes:

■

Birth > Amount=

50

■

Speed=

100

■

Shape=Cube (or use Shape Instance with a custom object, such as a
coin-shaped cylinder)

■

Display > Type=Geometry

This reduces the number of particles and slows them down, making it
easier to see what's going on.

3

Add a 

Spin operator

 on page 2863 to Event 01, and set both Spin Rate and

Variation to 

150

.

This gives the particles random spinning behavior as they fall.

4

Add an Age test to the end of Event 01, and set Test Value=15.

This allows each particle to fall and tumble for 15 frames before Go To
Rotation takes effect.

2982 | Chapter 14   Space Warps and Particle Systems

Summary of Contents for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

Yamaha DM 1000 Manual preview
DM 1000
Brand: Yamaha Pages: 30
Adobe ACROBAT 3D Manual preview
ACROBAT 3D
Brand: Adobe Pages: 822
AMX WebLinx Instruction Manual preview
WebLinx
Brand: AMX Pages: 50
M-Audio Heavy Guitars Quick Start Manual preview
Heavy Guitars
Brand: M-Audio Pages: 4
Cabletron Systems Lancast Media Converter 7000 User Manual preview
Lancast Media Converter 7000
Brand: Cabletron Systems Pages: 108
Samsung UN55C7000WF Quick Setup Manual preview
UN55C7000WF
Brand: Samsung Pages: 2
Samsung UN40C7000WFXZA Troubleshooting Manual preview
UN40C7000WFXZA
Brand: Samsung Pages: 4
Samsung UN46ES8000FXZA Fast Track Troubleshooting preview
UN46ES8000FXZA
Brand: Samsung Pages: 5
Samsung UN40C7000WF (Spanish) Software Manual preview
UN40C7000WF
Brand: Samsung Pages: 7
Samsung UE40C7000WW User Manual preview
UE40C7000WW
Brand: Samsung Pages: 7
Samsung SVM-­S1 Quick Reference Manual preview
SVM-­S1
Brand: Samsung Pages: 8
Samsung SyncMaster T23A750 Service Manual preview
SyncMaster T23A750
Brand: Samsung Pages: 46
Samsung UN40ES6820F Service Manual preview
UN40ES6820F
Brand: Samsung Pages: 85
Samsung SyncMaster C27A750X (Spanish) Manual Del Usuario preview
SyncMaster C27A750X
Brand: Samsung Pages: 102
Samsung SmarThru 2 User Manual preview
SmarThru 2
Brand: Samsung Pages: 113
Samsung UN60D6450UF (Spanish) E-Manual preview
UN60D6450UF
Brand: Samsung Pages: 222
Samsung UN60D7050VF (Spanish) E-Manual preview
UN60D7050VF
Brand: Samsung Pages: 248
Samsung UN46ES7500FXZA E-Manual preview
UN46ES7500FXZA
Brand: Samsung Pages: 704

Brands by name

Popular brands

Load more brands