Atex AR950, Operation Manual

Page: 35 / 106

28
Preparation for Work
Preparation before use
■
Adjusting the Forward/Backward Position of the Seat
The seat can be adjusted forward and backward according to the body size of operator. Adjust the
seat to a suitable position so that the levers and pedals can be operated properly.
1. Tilt the seat forward and loosen the knob
bolts (2 pcs) under the seat, or adjust the
seat base forward or backward.
2. Sit on the seat and con fi rm that you can
operate the levers and pedals properly.
3. Tilt the seat forward and securely tighten
the knob bolts (2 pcs) under the seat to lock
the seat base.
■
Adjusting the Steering Wheel Height
The height of the steering wheel can be adjusted at one of three different positions according to
the body size of the operator. Adjust the height at a position where the steering wheel can be op-
erated properly.
1. Remove the bolt and U-nut before moving
the handle shaft.
2. Move the handle shaft up and down to
adjust the height.
3. A loose handle shaft will bring a very
dangerous situation, so securely tighten the
bolt and U-nut.
Seat
Knob Bolt
Seat Base
Handle shaft
U-nut
Bolt