23
Name and Function of Each Part
■
Grass Cutting-height Stopper
The grass cutting-height stopper is used to set the low-
er-limit position of grass cutting height. Loosen the
knob bolt, adjust the cutting-height stopper position
and tighten the knob bolt. Then, the bolt will function
as a stopper for the cutting-height adjustment lever.
■
Cutting-blade Clutch Lever
The cutting-blade clutch lever is used to turn on/off
the power of the cutting blade. Shifting the lever to
the ‘Off” position activates the interlocked brake on
the cutting blade to stop the cutting blade. The cut-
ting-blade clutch lever cannot be shifted to the “On”
position while the cutting-height adjustment lever is in
the “Start Engine” position.
■
Cutting-blade Cover
The cutting-blade cover is used to prevent small stones
and foreign matters from scattering during work. It
can be removed by loosening one bolt when replacing
blade or servicing.
(Refer to p.78 of this manual)
■
Seat
This is the seat only for the operator. Tilt the seat
forward, loosen the knob bolts at the back of the seat.
Then, slide the seat forward and backward to adjust it
at suitable position, according to body size of the oper-
ator.
Cutting-height Stopper
Cutting-blade clutch lever
Off
On
Cutting-blade cover
Seat
Knob bolt x 2
Summary of Contents for AR950
Page 105: ......
Page 106: ...0675 944 011 0 ATEX CO LTD 1 2 5 Kinuyama Matsuyama Ehime 791 8524 Japan...
