Atex AR950, Operation Manual

Page: 54 / 106

47
How to Work
●
Make sure of safety before washing the cutting-blade cover.
①
Make sure that the ground is fl at and there are no obstacles
nearby.
②
Keep the machine away from the people othe than the operator,
especially children.
③
Be sure to close the cutting-blade cover.
④
The operator should remain in the seat while washing the cut
ting-blade cover.
1. Depress the brake pedal to the “Locked”
position. (Refer to p.21,22 of this manual)
2. Connect a water hose to the cutting-blade
washing pipe. The tip of the pipe has two steps.
Connect the water hose with the tip of the pipe,
or slide it further to the thicker portion,
depending on the size of the water hose. If the
water hose is loose, use hose bands, etc., to
securely connect the hose.
3. Supply water through the water hose.
■
How to Wash the cutting-blade Cover
Danger
※
Do not wash the cutting-blade cover without making sure of safety fi rst, as it may lead to
an unexpected accident.
●
The machine is designed to easily wash inside the cutting-blade
cover. However, the cover may not become completely clean
depending on how dirty the inside of the cutting-blade cover is.
If the cover is still dirty, wash the cutting-blade cover again
or use a water hose.
●
The cutting blade should soomthly rotate, so be careful not to let
the water hose tangle up with the cutting blade.
Cutting-blade cover washing pipe
内径16mmパイプ用
内径13mmパイプ用
For a pipe with inner diameter of 13 mm
For a pipe with inner diameter of 16 mm
Pipe tip