60
How to Work
5. Re
fi
ll the speci
fi
ed oil up to the “Full” position of
oil tank.
After the oil is coming out of the air vent hole
of front axle, tighten the air vent plug. It takes
about 10 ~ 20 minutes for this operation.
6. Re
fi
ll the speci
fi
ed oil up to the “Full” position
again.
7. Start the engine, and warm up the engine.
8. While the engine rotates at idling speed, apply
the HST pedal/lever about 10 times forward and
backward slightly.
9. Raise the engine speed, then apply the HST
pedal/ lever forward and backward about 10
times. If the oil is reduced in the oil tank, re
fi
ll
the oil up to the “ Full” position again.
Air vent hole
●
If the oil does not rotate around in the entire
hydraulic circuit, do not apply the HST pedal/lever
fully or increase the engine speed. It may cause break
down.
(AR950F)
Summary of Contents for AR950
Page 105: ......
Page 106: ...0675 944 011 0 ATEX CO LTD 1 2 5 Kinuyama Matsuyama Ehime 791 8524 Japan...
