71
○
×
How to Work
■
Adjusting the Neutral Position of the HST Lever / Pedal
1. After starting the engine, check to which
direction the machine moves slightly, forward
or backward. Apply the parking brake.
2. Loosen 2 bolts
fi
xing the adjusting plate, and
then adjust the adjusting plate forward or back-
ward. After adjustment, tighten up the bolts.
3. If the machine moves again slightly after
releasing the parking brake, adjust the
adjustment plate so that the machine cannot
move slightly.
4. Make sure that the shift is located between HST lever
and Arm (HST) as shown in the
fi
gure on the right.
●
If the machine moves slightly forward or backward on
fl
at ground
even when the HST lever/pedal is in the “Neutral” position, the
neutral position of the HST lever/pedal should be adjusted. Adjust
the neutral position of the HST lever immediately as you notice
the above situation; otherwise, an unexpected accident may occur.
●
Adjust the neutral position on
fl
at and rigid ground with chocks
(wheel stops) put underneath the front wheels of the machine.
Adjusting plate
Bolt
HST lever
Arm (HST)
Danger
・
machine moves forward slightly
→
Adjust forward
・
machine moves backward slightly
→
Adjust backward
Summary of Contents for AR950
Page 105: ......
Page 106: ...0675 944 011 0 ATEX CO LTD 1 2 5 Kinuyama Matsuyama Ehime 791 8524 Japan...
