Important Notes
●
Start by reading carefully this [User’s Manual]. This is the
fi
rst step of safety work.
●
This Operation Manual describes the basic information on safety the user must pay attention to when
using the Ride-on Bush Cutter, as well as the technical and other instructions on correct operation,
adjustment and maintenance that must be followed to keep the Ride-on Bush Cutter operating in its
best condition.
●
Before operating your Ride-on Bush Cutter for the
fi
rst time, and also during and before day-to-day
operation and handling, read this Operation Manual carefully and gain a full understanding of the
instructions provided herein so as to use your Ride-on Bush Cutter.
●
Keep this Operation Manual in a safe place so that you can access it for reference whenever necessary.
●
Use this product as a Ride-on Bush Cutter. Don’t modify or use it for any purpose not originally
intended. Modifying your Ride-on Bush Cutter or using it for any purpose not originally intended will
void the warranty. (Refer to the Warranty Standards for details)
●
ATEX & CO., LTD. (herein after referred to as ATEX) shall assume no responsibility for any loss or
injury arising because of failure to observe the instructions mentioned at this operation manual or
operation without caution to be required normally or modifying Ride-on Bush Cutter.
●
It is impossible to predict all possible dangers you may encounter during the handling of your Ride-on
Bush Cutter. Accordingly, the instructions provided in this Operation Manual or cautionary
information displayed on you Ride-on Bush Cutter does not cover all dangers. For this reason, it is
necessary to pay enough attention to prevent accidents, in addition to observing the instructions
provided in this Operation Manual and cautionary information displayed on your Ride-on Bush
Cutter, when operating your Ride-on Bush Cutter or performing its daily inspection.
●
Needless to say, the performance, propensity for breakdown and durability of each Ride-on Bush Cut-
ter varies depending on its original design, proper user of materials and workmanship of
manufacturer. On the other hand, we cannot ignore the impact of how the Ride-on Bush Cutter is
handled and maintained at daily use.
●
This Ride-on Bush Cutter is designed for use in Europe, and accordingly its suitability or certi
fi
cation
under safety standards are effective in Europe. ATEX shall be released from any responsibility
whatsoever, either direct or indirect, for any compensation or other problem arising out of or in
connection with an accident or other unwanted outcome of using your Ride-on Bush Cutter in country
outside Europe and Australia.
ⅰ
Summary of Contents for AR950
Page 105: ......
Page 106: ...0675 944 011 0 ATEX CO LTD 1 2 5 Kinuyama Matsuyama Ehime 791 8524 Japan...
