8
Points on Use
4. When crossing a ditch or going over a furrow,
be sure to pass foot boards over the ditch/
furrow at right angles and drive on the foot
boards slowly at very low speed. Failure to
do so may lead to a wheel(s) going off the foot
board or slipping, thus causing the machine
to fall down, which result in a very dangerous
situation.
5. Never work at night or in any environment
where visibility of the surroundings is low,
because the machine may crash, fall down etc.
and cause death or create a very dangerous
situation. Particularly when moving in
twilight hours, travel at low speed. (Use
the headlight on the Machine while moving)
6. When leaving the machine, park the machine
on a
fl
at,
fi
rm ground, put the cutting-blade
clutch lever in the “OFF” position. Then, apply
the parking brake, stop the engine, and
remove the ignition key.
Summary of Contents for AR950
Page 105: ......
Page 106: ...0675 944 011 0 ATEX CO LTD 1 2 5 Kinuyama Matsuyama Ehime 791 8524 Japan...
