2
Points on Use
■
Preparation
1. As a preparation, be sure to perform the
necessary inspections by reffering to <List of
Periodic Inspection and Maintenance
Locations > in this manual.(Refer to p. 49~52
of this manual)
2. Check if any of the protective covers is still
removed. Starting the engine or operating the
machine when all of the covers are not
installed will create a very dangerous situation
as the dangerous parts will remain exposed.
3. Be sure to stop the engine before refueling or
adding/charging lubricant. Keeping a lit
cigarette in your mouth or using any
fi
re
source nearby is strictly prohibited. Failure
to observe this instruction may result in
fi
re.
4. Check the condition of the slope of the
fi
eld,
and don’t drive or work in the steep slope that
exceeds the maximum slope angle, causing fall
down.Drive in bumpy area at low speed.
●
Maximum slope angle
AR 950 : 15 °
AR 950F: 25
Summary of Contents for AR950
Page 105: ......
Page 106: ...0675 944 011 0 ATEX CO LTD 1 2 5 Kinuyama Matsuyama Ehime 791 8524 Japan...
