27
Preparation for Work
Inspction brfore Use
Caution
●
Be sure to conduct inspection/maintenance before use.
●
At the time of inspection, maintenance, refueling, be sure to
stop the engine, and cutting
blade completely.
●
Be sure to check whether all of covers/caps in original position,
then operate the machine.
■
Startup Inspection
Warning
●
Be sure that there are chipping nor cracks on the blade
before use.
To prevent breakdown, it is important that you always keep the good condition of the machine. For this
reason, you should conduct the startup inspection everyday without fail.
Follow the inspection steps below.
1. Conduct maintenance on the locations that showed malfunction the day before, if
any.
2. Inspect the items indicated by a “O” in the “startup” table under “Inspection timing”
in <List of Periodic Inspection and Maintenance Locations>(Refer to p.49 to 52 of
this manual)
Summary of Contents for AR950
Page 105: ......
Page 106: ...0675 944 011 0 ATEX CO LTD 1 2 5 Kinuyama Matsuyama Ehime 791 8524 Japan...
