Atex AR950, Operation Manual

Page: 56 / 106

49
Inspection/Maintenance
How to Work
●
Make sure of safety before refueling or conducting inspection
①
Park the machine in a fl at and open space.
②
Stop the engine and remove the ignition key from the key switch.
③
”Lock” the parking brake pedal
Danger
※
Conducting inspection or maintenance on the machine without making sure of safety
may lead to an unexpected accident.
●
Neglecting inspection and maintenance may lead to an accident.
The machine should maintain its proper function and
performance. As a result, you can operate the machine safely at all
times. It is important that inspection and maintenance should be
done according to <List of Periodic Inspection and Maintenance
Locations>
●
Conduct the annual inspection once a year, monthly inspction once a
month, and daily inspection every day before commencing work.
●
Some items in <List of Periodic Inspection and Maintenance Loca
tions> require special knowledge or the speci fi ed tools or
instruments. If you cannot inspect any of listed items by yourself,
request the “Dealer from which you pruchased your Ride-on Bush
Cutter” to help you.
〈
List of Periodic Inspection and Maintenance Locations
〉
Item Detail of inspection
Inspection
timing
Remarks
Start up Monthly Annual
Machine/Engine
Startablilty
･ Check if the engine starts promptly
or generate any abnormal noise comes
out
The engine shall
start promptly
without any
abnormal noise.
○ ○ ○
Condition
of engine
revolutions
･ Check the idling speed and maximum
engine speed under no load. Also check
if the engine revolution is smooth and
continuous.
Each engine speed
shall be in the
specified range.
The revolutions
shall continue
smoothly.
○
Ask the”dealer
from which
you purchased
your ride-on
bush cutter”
to conduct this
inspection.
･
Operate the throttle lever (idling to
full-open position) and check if any
resistance is felt on the throttle lever
and if the engine stalls.
There is no
resistance, and the
engine shall not
stall.
○ ○ ○