Atex AR950, Operation Manual

Page: 62 / 106

55
How to Work
■
How to Change
1. Prepare an appropriate container into which
oil is drained. Put the container underneath
the drain hose on the inside of the rear-left
wheel of the machine.
2. Use a slotted screwdriver or 10-mm spanner
to loosen the drain bolt located on the front
left of the engine until two or three threads
become visible, to discharge oil.
3. After oil has been drained away, put back the
bolt and tighten it securely.
4. Remove the oil fi ller cap and re fi ll the speci fi ed
oil slowly until the “FULL” position indicated
on the oil level gauge.
5. After re fi lling engine oil, securely tighten the
oil fi ller cap so that oil cannot leak out of it.
●
As a rough guide, firstly change engine oil after 8 hours from ini-
tial start of engine and then every 50 hours of operation or every year,
whichever arrives fi rst, thereafter.
Drain hose
Container
Drain bolt
Oil fi ller cap