manualshive.com logo in svg

Argus 152, Manual

Share
Download
Argus 152 Manual Download Page 126

14 IP tests

126

ARGUS 152

Starting HTTP download (example: access mode VTU-R, already active)

Connecting the service.

The profile shown in the display 

(profile 1 in this example) is used for HTTP 
download.

If no connection is established, ARGUS 
automatically connects at this point using 
the default profile (see page 44).

<Edit>

A virtual line is added to the 
service Data.

<Info>

Duration of activation.

<Test>

Opens test selection.

<Stop>

Deactivates the service.

e.g. select HTTP download

<Profile>

Displays the available 
HTTP download profiles.

Continued on 
next page

Summary of Contents for 152

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands