9 Virtual lines (VL)
ARGUS 152
79
9.3 Activating a virtual line
A service or test must be started in order to activate a virtual line. To enable a test to be
started, a service must be configured, and a virtual line assigned to it. In this example, the
service Data is configured and assigned ot a virtual line.
9.3.1 Starting a service
Continued on
next page
The VDSL access is active.
<Start>
The physical layer (VDSL), the virtual line
and the service Data are now active. This
is indicated by a green check mark.
<Info>
<Stop>
See page 96 for explanations of the
services.
Use the cursor keys to switch from
the layer-1 box over the virtual line to
the service Data.
If the physical layer is not yet
active, this is started automatically
with the service or test.
Starts the service.
Displays information on the
service Data (e.g. duration
of activity).
Stops the service Data.
