manualshive.com logo in svg

Argus 152, Manual

Share
Download
Argus 152 Manual Download Page 121

14 IP tests

ARGUS 152

 

121

Starting traceroute 

(Example: access mode VTU-R, already active)

Connecting the service.

The profile shown in the display 

(profile 1 in this example) is used for the 
traceroute test.

If no xDSL or Ethernet connection is 
established, ARGUS automatically 
connects at this point using the default 
profile (see page 44).

The service Data and the VDSL 
connection are active.

 

<Edit>

A virtual line is assigned to the 
service Data.

<Info>

Duration of activation.

<Test>

Opens test selection.

<Stop>

Deactivates the service.

e.g. select Trace route

<Setting>

Changes traceroute 
parameters, see 
page 120.

Continued on next 
page

Summary of Contents for 152

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands