manualshive.com logo in svg

Argus 152, Manual

Share
Download
Argus 152 Manual Download Page 165

16 IPTV tests

ARGUS 152

 

165

A total of three user-defined IPTV profiles 
are available.

Edits the marked IPTV profile.

Setting

Description

Test parameters:

IPTV: 

You can create a total of three IPTV profiles.

<Edit>

 Activates the profile you wish to edit.

Channel 

selection

The channel list can be used and edited in all profiles. You can store 
up to 250 channels. Using the software WINplus/WINanalyse you 
can also create a configuration conveniently using the PC and load it 
to ARGUS.

Selecting the TV channels for the IPTV test.

<Edit> 

Edits channel

Multicast IP

Specifies the multicast IP.

Range: Range 0.0.0.0. to 255.255.255.255

Default: 

224.0.0.0

Edits and modifies 
the marked 
parameters

Summary of Contents for 152

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands