manualshive.com logo in svg

Argus 152, Manual

Share
Download
Argus 152 Manual Download Page 49

7 Operation on xDSL accesses

49

ARGUS 152

 

Displays the bit distribution 

i.e. transported bits per tone (channel)

Y-axis: bits

X-axis: tones (channels)

Line interference sources can be identified 
on the basis of the bit distribution 

(e.g. due to HDSL, RF, DPBO etc.). 

Graph functions:

The graph functions such as zoom, cursor 
and setting of the x-axis enable detailed 
analysis of the graphs:

ARGUS switches to the 
previous display.

<Continue>

Switches to next graph.

Exits the menu without changing.

You can also use this number key to tog-
gle the zoom function within a graph. 
The function of the cursor is described 
on page 51.
Toggles the x-axis from tone to 

frequency is described on page 52.
Toggles the min/max is described on 
page 52.
Switches automatically to the next graph 
with the view and adopts all settings for 
this graph. 

 

and 

 

Saves the result without disconnecting 
the connection.

Continued on 
next page

See page 54

Summary of Contents for 152

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands