manualshive.com logo in svg

Argus 152, Manual

Share
Download
Argus 152 Manual Download Page 199

17 Parallel tests

ARGUS 152

 

199

The possibility of parallel testing is illustrated using HTTP download and VoIP via the 

services Data and VoIP. Display and operation for further parallel tests, e.g. IPTV, is 

performed in the same way as for Data and VoIP.

ARGUS status screen.

The VDSL VTU-R access shown in the 
example and the services Data and VoIP 
are active.

Mark the server profile: 

(default is indicated with  ).

HTTP download starts automatically.

<Info>

Duration of activation

<Test>

Opens test selection.

<Stop>

Deactivates the service.

e.g. select HTTP download

<Profile>

Displays the available HTTP 
download profiles, see 
page 124.

<Edit>

Edits the marked profile,

see page 124 for changes to 
the individual settings.

Initialisation

Summary of Contents for 152

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands