manualshive.com logo in svg

Argus 152, Manual

Share
Download
Argus 152 Manual Download Page 84

9 Virtual lines (VL)

84

ARGUS 152

The services Data and VoIP are active. 
You can now run a variety of tests via the 
services Data and VoIP.

The display and operation for IPTV and VoD (video on demand) are the same as for VoIP.

Further examples of different virtual line assignments:

Example 1:

Example 2:

One virtual line is connected with the 

service Data and another with the service 
VoIP.

The virtual line for VoIP can thus be used 
for different protocol data than the virtual 
line for Data.

One virtual line was configured for the 
services Data, VoIP, IPTV und VoD. 

In this example, the services IPTV and 
VoD are active. 

Up to four virtual lines can be 
established for the service IPTV.

However, ARGUS only displays 
these as a single composite virtual 
line.

A detailed description is provided in 
the chapter IPTV, see page 164.

Summary of Contents for 152

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands