Altigen AltiWare OE 4.6, Administration Manual

Page: 356 / 518

Setting up an Exchange Server
14-18 AltiWare OE System Installation & Administration Manual
To install Outlook 2000 to Corporate or Workgroup mode:
1. Install Outlook 2000 from the Outlook 2000 or Office 2000 CD.
During installation, you will be prompted to choose a mode (Internet
Only vs. Corporate or Workgroup). Make sure you choose the
Corporate or Workgroup mode.
2. After installation is complete, start Outlook 2000 from Start
!
Programs. In the Microsoft Installer wizard, select Microsoft
Exchange Server to install, then click Next to move to the next
window.
Figure 11. Outlook setup, Exchange Server Name and Mailbox
3. In the above dialog box, type in values for the Microsoft Exchange
Server and Mailbox. Enter the name of the Exchange server, and enter
the test mailbox we created (AltiGen Assist) in the Mailbox field.
4. Click the Next button to bring up the next dialog box, which asks a
Travel question, to which you should answer No, then click Next.
5. Once you have completed the Setup Wizard, a final dialog box
appears, indicating that the information services that have been added
to your profile. Then a Done! dialog box appears; click Finish to end
this part of configuration.
6. If the values you entered for Microsoft Exchange Server and
Mailbox are correct, you will be able to use Outlook 2000 now. If they
are not correct, you’ll be asked to re-enter the Microsoft Exchange
Server and Mailbox names. Make sure you enter the correct values.
You can verify your input by clicking the Check name button.