Altigen AltiWare OE 4.6 Administration Manual Download Page 407

Page: 407 / 518

AltiWeb

AltiWare OE System Installation & Administration Manual

18-17

iW
eb

Configuring Auto Attendant

Note:

For detailed instructions, refer to Chapter 10, Auto Attendant
Configuration.

Run Auto Attendant.

Select 0-expand tree.

Make the following entries, then click Apply.

• Type an Item Name, if desired.

• To assign a voice message, check Prompt and select the number of

the appropriate message.

• Check Push URL, and type the path of the page you want to display.

• Select Level-Expand Tree in the Actions dropdown.

Figure 14.

"0 - expand tree" window

Summary of Contents for AltiWare OE 4.6







































































































































































































































































































































































































































































































































Search results

Summary of Contents for AltiWare OE 4.6

Reviews:

Related manuals for AltiWare OE 4.6

Brands by name

Popular brands

Altigen AltiWare OE 4.6, Administration Manual

Search results

Summary of Contents for AltiWare OE 4.6

Reviews:

Related manuals for AltiWare OE 4.6

Brands by name

Popular brands