Altigen AltiWare OE 4.6, Administration Manual

Page: 390 / 518

17-4 AltiWare OE System Installation & Administration Manual
Apply To Button
The Apply To button works with the following parameters: General,
H.323, TFTP (Server field only; Reset IP Phone and Boot Download
options cannot be applied to multiple extensions), and Debug.
IP Extension Log In/Log Out
The feature codes #26 (Extension Log Out) and #27 (Extension Log In) are
available on the Alti-IP 600. When the Alti-IP 600 phone is logged in using
#27 + ENTER, the LCD will display the extension number. The Alti-IP
600 must be onhook for #26 and #27 to work.
Dialing an IP Number Directly from the Alti-IP 600
To dial an IP number directly from the Alti-IP 600 phone set, enter the IP
address using the * key to enter periods followed by the # key.
Notes:
• This only works when the Alti-IP 600 is operating in basic mode.
• If the Alti-IP 600 is configured for a public IP address, you can call
other public IP address devices.
• If the Alti-IP 600 is configured for a private IP address, you can call
other private IP address devices that you can “see” or that are on your
subnet.