Altigen AltiWare OE 4.6, Administration Manual

Page: 178 / 518

Using a Tenant Table
5-34 AltiWare OE System Installation & Administration Manual
To access the Tenants window, select System Configuration... on the
Management menu, then click the Tenants tab.
Figure 18. Tenant window, System Configuration
Configuring the Tenant Table
Configuring the tenant table involves first adding entries to the tenant list,
then using Extension Configuration and Trunk Configuration to assign
extensions and trunks, respectively, to tenant IDs.
To create tenant entries:
1. In the Tenant window, click the Add button to open a small Tenant
Configuration dialog box.
2. In the dialog box, type in the Tenant Name and click OK. Then click
the Apply button in the Tenant window. The tenant ID is assigned
automatically and sequentially.
3. Repeat the above steps for all the tenants you want to add, then click
OK to close the System Configuration window.