Altigen AltiWare OE 4.6, Administration Manual

Page: 156 / 518

Defining System Call Restrictions
5-12 AltiWare OE System Installation & Administration Manual
Editing Speed Dial Entries
To add or edit an entry, double-click the Station ID number you want to
work with, or select the number and click Edit. A dialog box appears:
Type in the full number as you would dial it, with a maximum of 20 digits
per entry. For example, the phone number 914085551212 comprises of 9
(trunk access code), 1 (long distance prefix), followed by 408 (area code),
and finally the seven digit telephone number.
Valid digits include 0 through 9, #, *, and (,) comma. The comma
represents a one (1) second pause.
Adding Names and Comments
If you want to add names and comments for the users’ convenience, use the
following steps:
1. Configure the system speed dialing numbers as described in the
preceding procedure.
2. Open an AltiView user desktop and define the names and comments
for the speed dialing numbers.
3. Save the speed dial setup and Exit AltiView.
4. From the C:\Program Files\AltiGen\AltiView\<ext#>\, copy
sysspeedlist.dat directory to the same directory for every AltiView
user desktop.
Defining System Call Restrictions
Call Restriction allows you to block outgoing calls for up to 20 prefixes.
This window also provides for blocking all outgoing calls and for enabling
hop off to other trunks when that function has been set up.
The restrictions you set up here are global restrictions.