R3267 Series Spectrum Analyzer Operation Manual (Vol.1)
1.6 Cleaning, Storing and Transporting the R3267 Series
1-13
1.6
Cleaning, Storing and Transporting the R3267 Series
1.6.1
Cleaning
Remove dust from the outside of the R3267 Series by wiping or brushing the surface with a soft cloth or
small brush. Use a brush to remove dust from around the panel keys. Hardened dirt can be removed by
using a cloth which has been dampened in water containing a mild detergent.
CAUTION:
1.
Do not allow water to get inside the R3267 Series.
2.
Do not use organic cleaning solvents, such as benzene, toluene, xylene, acetone or similar compounds, since
these solvents may damage the plastic parts.
3.
Do not use abrasive cleaners.
•
Removing the Display Filter
Normally cleaning the display filter from the front should be sufficient. However, if the inside of the
filter or the LCD surface is dirty, you can detach the screen filter from the R3267 Series by removing
the two screws on the front and pulling the right-hand part of the filter forward. Clean the filter with a
piece of soft close.
CAUTION
Do not touch the LCD display with your finger when the filter has been removed.
Figure 1-12 Removing the Display Filter
Display filter comes off
by removing two screws
